HELP DIRECTORY - 9-U
ALL HELP DIRECTORY FILES
0  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

 NOTE : THE HELP TOPICS
 The help topics consist of links and Help Topics accumulated over the years.
Many of them were from RCM Model magazine that is now defunct. 
Please review these help topics.
If we have a topic or LINK listed and you are the author and do not want this published in this E-book,
Just notify us and it will be promptly removed.
gwhite4432@aol.com
SELECT YOUR TOPIC BELOW :

RETURN TO THIS INDEX

GO TO BOOK INDEX

  • TOPIC LISTINGS :
     UIUC Airfoil Data  : This one is shareware, and it uses the UIUC Airfoil Data Site airfoils among others. It also creates output files to MSES, FUN2D, and AutoCAD. ...
     UIUC Airfoil Coordinates Database
    Beside those links listed below, similar links can be found back at the UIUC Airfoil Data Site homepage,
    Ultracote Printing  Goldberg Ultracote film covering has a paper backing that you can print on. Cut a 8.5 X 11 inch sheet, put it in an inkjet printer, and print your design on the paper backing
    (don't use a laser printer or anything that uses heat - it'll destroy your covering). This works well for large lettering. Make sure your image is reversed, so that when it's printed on the backing you can
    cut it out and it'll be correct when ironed on your plane. If you want to use a piece of covering that's smaller, print the design onto paper first. Then carefully tape the Ultracote to the paper over the design. Then run the whole thing through your printer, and the design should print in the same place.