TOPIC LISTINGS :
Velcro Tips
Velocity Topics
Vibration Tips
Video Tips
Vinyl Letter Tips
Vision Tips
HELP DIRECTORY -
9-V
ALL HELP DIRECTORY FILES
0
A B
C D
E F
G H
I
J
K L
M N
O P
Q R S
T U
V W
X
Y
Z
NOTE :
THE HELP TOPICS
The help topics consist of links and Help Topics
accumulated over the years.
Many of them were from RCM Model magazine that is now defunct.
Please review these help topics.
If we have a topic or LINK listed and you are the author and do not want
this published in this E-book,
Just notify us and it will be promptly removed.
gwhite4432@aol.com
SELECT YOUR TOPIC BELOW :
Vacuuming Bagging Topics
45
Degree Weave Strength (a writeup by Oliver Wilson on several reasons to try a
45 degree weave orientation while bagging and building fuselages)
Bagging
Compound Wingtips (Oliver Wilson's method for bagging compound wingtips)
Cheap Little Sucker -
vacuum pump
Composite
Wing Layup (a writeup on how to create fiberglass bagged composite wings)
***
DO YOU USE EPOXY? *** (of course you do...) Read this important note about latex vs.
vinyl gloves when working with epoxy!
Hot
Box Thermostat Source (a note by Fritz Bien on where to find thermostats for
epoxy curing hot boxes)
Simple
Vacuum Bagging System :How to set up a truly inexpensive vacuum bagging rig!
Vacuum
Bagging - Very well-done primer on building and hinging vacuum-bagged
wings.
By Chris Fouquet.
Vacuum
Bagging Wings
Vacuum Forming own Canopies
Vacuum Forming (The Future is
Electric)
http://www.charlesriverrc.org/articles_foam_vac.htm#Vacuum
Bagging
http://www.pilotsguide.com/rc/vacbag.shtml
VELCRO USES
Velcro can be used on anything you might wish to transfer from one
model to another (Such as Pilots etc)
Take your propeller balancer and attach a Top Flite 11 x 8 prop. Hold the
balancer in the wind to achieve the maximum propeller RPM. Measure the RPM with your
tachometer. Divide that RPM reading by 100 and the resulting number will be within 2 MPH
of the existing wind velocity.
HELICOPTER
VIBRATION PROBLEMS
If the tail boom shakes, the imbalance is likely in the rotor head
assembly. If it is the landing skids that shake, the imbalance is likely in the engine fan
or clutch assembly.
RC-CAM: Video camera project for use on a R/C model plane,
helicopter, car, boat, or robot. Full instructions and forum on building
a low cost wireless video color camera system
VINYL LETTERS
Most stationary and office supply stores stock adhesive backed, vinyl
letters and numbers which can be used to inexpensively decorate your
airplane.
It is a real bladder grabber
the first time you find yourself looking for your aircraft when flying
into the sun.
It doesn't take but a few seconds .
If you do this ... just remember the aircraft direction... try and relax and
look for it when you feel it is out
of the sun. Just let it fly itself and hope it is straight and level.